Invalid Product

QuadParts - Accessories / Billet Parts

heaps of billet alloy and other ATV accessories.

ALUMINUM FOLDING RAMPS

Alum Folding Ramps $199 pr Rated for 680 kg per pair (1500 lbs per pair) so you can ride your quad straight up your vehicle with these fold up ramps no problems, they also come with safety straps to secure to the trailer or ute etc. 2.3Mt Long
 
  • Return to Accessories / Billet Parts

  • FAT BAR CLAMPS - SHORT

    Raises Bars 17.5mm suits Fat Bars 1-1/8" or 28.6mm
  • Return to Accessories / Billet Parts

  • FAT BAR CLAMPS - TALL

    Raises Bars 34mm suits Fat Bars 1-1/8" or 28.6mm
  • Return to Accessories / Billet Parts

  • Alloy Bar Ends

    Alloy Bar Ends are a necessity if you start racing and are a good way to bling up your Quad!
  • Return to Accessories / Billet Parts

  • Billet Dip Sticks

    Billet Dip sticks to suit yamaha - blue only
  • Return to Accessories / Billet Parts

  • Banshee Reed Spacers

    QUADPARTS has access to a low cost high quality Reed Spacer Kit for the Banshee. iEach kit comes with two 10mm thick billet spacers, gaskets and stainless bolts. The spacers are designed to move the reeds away from the crank turbulence prolonging reed life and increasing crank volume, this also increases bottom-mid range performance.
  • Return to Motor / Carbie / Cooling

  • Idolspeed Quadshot

    Idolspeed Racing products is excited to introduce a brand new holeshot starting device designed specifically for quads.
    The Quadshot by Idolspeed
     
     
    The Quadshot starting device has been racer tested on and off the track for proven performance. Quadshot will help transfer power to the ground while keeping the front end down. This innovative bolt on device is adjustable and weighs less than a pound! With the ability to compress the front end suspension up to 3 inches, you will have the jump on the competition.
     

                                Don’t be last out of the gate!

  • Return to Controls / Steering

  • ATV Club of WA

    Club Information:
     
    The ATV Social & Racing Club Inc was started to promote ATV Social and Racing in Perth, Western Australia. Over the few years of the club running, we have seen many steps forward in ATV riding and racing in Perth.

    The club is involved in many different events to suit beginner to expert. These events range from State Round MX to Natural Terrain's to Social Zooms. The ATV Social and Racing Club Inc is an ideal way to meet new people that share the same interests.

    http://www.atvwa.com/index.html
  • Return to Links / Information

  • 45mm Extended Wheel Hubs

    45mm Extended Wheel Hubs to suit all popular brands of sport quads, comes in a set.  
  • Return to Axles, Lift Kits & Accessories

  • Front Wheel Spacer 30mm

    Front Wheel Spacer Set plus 30mm
  • Return to Axles, Lift Kits & Accessories

  • CHAIN GUIDES & SLIDERS

    QuadParts offers a full range of chain rollers and sliders that are made by T.M Design works. These sliders and rollers are designed to create zero drag whilst maximising useable horsepower
  • Return to Axles, Lift Kits & Accessories

  • Ratchet Style Clutch Lever

    This Ratcheting Style Adjustable Clutch lever make life easier for adjusting the clutch on the run, they come in Silver, Blue & Red   
     
     
  • Return to Controls / Steering

  • 7/8 Bars ATV High Bend

    7/8 Bars ATV High Bend, great for Banshee's, Blasters & 660 Raptors etc 
  • Return to Controls / Steering

  • Grips - Soft Compound

    ATV Grips - Soft Compound - Black Only
  • Return to Controls / Steering

  • Huevos 12 (ATV Pro Racing, Extreme Quad Freestyle Stunts)

    HUEVOS 12 ATV DVD $40 pick up or $45 delivered anywhere in Australia 
  • Return to Entertainment / DVDs

  • KILL SWITCHES

    These high quality kill switches are designed to stop the engine should you ever part ways with your ride. They are a must have for racing and good insurance for recreational riders. These switches are designed to mount directly to the handle bar and come with a lanyard cord to that clips to you. The kill switches are made from ABS plastic and are Available in four colours: Black, Blue, Red and Yellow

  • Return to Electrical

  • CNB Batteries

    We carry a good selection of batteries to suit popular models of quads, please call if your require further assistance, if you know the battery number please write it down
  • Return to Electrical

  • Brand New 50cc & 90cc Apex MXR Pro Shark

    Engine

    • Type: Liquid-Cooled A-One Two Stroke
    • Capacity: 49.3/89.2cc
    • 19/24mm carby with fibre reeds k/n type air
    • Filter with pre filter, alloy air box
    • Performance Apex pipe & muffler
    • Large alloy radiator

    Transmission

    • Performance high speed front variator and clutch springs
    • Case saver and slipper sprocket

    Suspension & Wheels

    • Front: Braced chrome molley A-arms 14.5 dnm adjustable & rebuildable shocks with 8.5 travel
    • Rear: Braced and lengthened alloy round housing carrier & Chrome axle with alloy lock nut & skid plate
    • Alloy duel rolled edge wheels with triple plate centre
    • Front Tyres: Kenda Klaw  MXF 20 x 6-10
    • Rear Tyres: 18 x 9.5-8 Duros
    • Brakes: Discs brakes all round

    Chassis

    • Fully gusseted frame
    • Anti vibe steering stem

    Other

    • Billet alloy thumb throttle
    • Alloy bars
    • Race wire loom with pro design kill switch
    • Alloy pro peg type nerf bars with heal guards
    • Alloy fuel cap
    • Alloy skid plate
    • Stainless brake lines with alloy clamps
    • Alloy grab bar
    • Alloy front bar
  • Return to Quads Bikes & Trailers For Sale

  • Apex Pro Sharks

    Please call for more info!
     
    08 9306 3663 Mike
     
  • Return to Junior Quads

  • Plastic Welding

    We now offer a plastic welding service, we generally repair all types of plastics and plastics mounts including head light mounts, so if you would like any quadparts repaired, please bring all the pieces to us to see if we can sort it out for you!
  • Return to Graphics Kits / Plastics / Numbers

  • Servicing, Repairs & Set up's

    If you would like us to:
     
    Service your Quad, Two Wheeler or Road bike?
     
    fit some A-arms
    give it a wheel alignment
    replace axle bearings
    Change your tyres
    have an oil cooler fitted
    weld up your frame or nerfs
    Straighten your stem
    check valve clearances
    MX set up's or Enduro set up's done
    setting your shocks
    pipe repacked
     
    or just give you a hand to get your bike running at its best, all at reasonable rates plus parts required all in our new 200mt work shop

    Please feel free to give me a call if you wish to discuss your needs on 9306 3663 or mike@quadparts.com.au
     
    MTA Member 36416
    Registered Workshop
    Registered Mechanics 
     
     
  • Return to Workshop

  • Road Bike Servicing & Repairs

    We might specialise in Quads but we can also service and repair road bikes as well, give us a call to book in now! 9306 3663
  • Return to Workshop

  • MX & Trail Bike Bike Servicing & Repairs

    We might specialise in Quads but we can also service and repair MX & Trail Bikes as well, give us a call to book in now! 9306 3663
  • Return to Workshop

  • Camping Gear

    We now have a good range of Camping Gear including Swag's, Sleeping Bags, Fold up Chairs, Tropical boxes etc so you can enjoy your weekends away with you mates and quads!   
  • Return to Riding Gear & Accessories

  • Suspension Servicing and Re-Valving

    Suspension service
    Front & Rear Shock services include full component disassembly and thorough individual part inspection, Fluid replacement with fully synthetic MAXIMA Fluids, Seal and Bush replacements if necessary and evaluation of valving structure and spring rates all at very competitive prices. We deal with the only Authorised Elka Service & Warranty Centre in Australia therefore we have access to a large range of genuine parts in stock from springs, Seal heads, Spacers & Much more. We handle all brands of suspension from Elka, PEP, Fox, Ohlins to Genuine Factory Brands like WP, KYB , Showa and More........
    So if you would lile us to help you out please feel free to bring your shocks in or bring the whole quad in and we can remove them for you as part of a package
     
    Ps. some stock shocks are sealed units and can not be opened, please call for details 
  • Return to Workshop

  • Tyre Changing Service

    We can change tyres from 7" to 24" Rims, so that will cover all ATV Tyres sizes, and we can generally do it while you wait!
    Prices start at $10 
  • Return to Sport / Racing ATV Tyres

  • Tyre Changing Service

    We can change tyres from 7" to 24" Rims, so that will cover all ATV Tyres sizes, and we can generally do it while you wait!
    Prices start at $10 
  • Return to Workshop

  • BACK ARMOUR PLATES

    Back Armour Plates come three sizes, Small, Medium, and large, please contact Rockingham Signwriters directly on 9527 6413 or email rocsigns@iinet.net.au , or click on the link below and scroll down to find out more information, and tell Bethwyn or Grant, Mike from QuadParts sent you.
     

     

    Fade Background
    Custom/ Thor

    $80
    Flouro/ Matt black
    $60
    Plain Background
    $50

     
     
  • Return to Graphics Kits / Plastics / Numbers

  • NUMBER PLATES BACKGROUNDS & NUMBERS

    Number Plate Backgrounds & Numbers to suit your race Quad, please contact Mike@quadparts.com.au or 9306 3663 with all your details
  • Return to Graphics Kits / Plastics / Numbers

  • GRAB BAR NUMBER PLATES

    Number Plate Backgrounds & Numbers to suit your race Quad, please contact Mike@quadparts.com.au or 9306 3663 with all your details
  • Return to Graphics Kits / Plastics / Numbers

  • Tusk Parking Brake Block Off Plate

    Made of 6061 T-6 Billet aluminum, Block Off plate covers are designed to go on the rear caliper to cover the caliper after the stock OEM parking brake mechanism is removed.
  • Return to Accessories / Billet Parts

  • Gas Cap Vent Hose

    Replaces awkward fuel tank breather hoses
    One way vent allows the tank to breath while preventing fuel from splashing out and making a mess.
    Made from 6061 T-6 aluminum
    One way vent allows the tank to breath while preventing fuel from splashing out and making a mess.
    Made from 6061 T-6 aluminum

     Silver, Blue & Red Available 
     
  • Return to Accessories / Billet Parts

  • Tusk Quick Release Whip Flag

    • 6' whip flagpole is made from durable 1/4" fiberglass and comes complete with a removable split-bolt mount.
    • Unique two-piece pole design allows easier storage while being very strong.
    • Flags come with rubber O-ring mounts for the option of stacking multiple flags.
    • Complete with mounting bolt that can be easily removed, making the pole compatible with quick release holders.
  • Return to Accessories / Billet Parts

  • Second Hand Parts

    We have heaps of second hand a-arms, axles, shockies and gear for sale, some after market, some stockies,  but all at reasonable prices!
  • Return to Used But Not Abused

  • Second Hand Quad Tyres

    We generally have some good used Rim and tyres in stock, please call to check out what we have 9306 3663
  • Return to Used But Not Abused

  • WAQUADMX.COM

    This site has been created to promote Quad Motocross Racing in Western Australia.
    We hope to provide informative and up to date information on Race events for
    Juniors and Seniors at Club Level & State Level
     
     
  • Return to Links / Information